Printables By Caren: Board Game Clips

Have you ever been playing your favorite multi-board, or modular-board, game and someone nudges the board only to have everything lose its spot?  Or maybe you have boards that are slightly warped and don't lie flat that need just a little help?  Or possibly you have one of those giant multi-fold boards which need a little coaxing to stay aligned?  Board Game Clips are specifically engineered for this task and are the solution to all of these issues!  

Board Game Clips will snugly and temporarily clip together two boards, keep seams in boards closed, or flatten slightly-warped boards with minimal intrusion into the playing surface - all without noticeably marking or scuffing your board.

Every facet of these clips is designed around enhancing your gameplay experience and protecting your board in the process:

• The bottom of these clips are less than 1mm thick so your boards are raised only an unnoticeable amount.
• The thick outer edge helps provide a great deal of tension to help the clip grip firmly.
• The leading edges are rounded to help prevent catching or scratching on your printed surfaces.
• The tight interior corners prevent premature wear of the clips and ensure they will last for many hundreds (possibly thousands) of uses!
• These Crystal Clear clips won't hide the artwork on your boards.

Each pack comes with EIGHT (8) clips. Choose from three different shapes (straight, 90-degrees, and 120-degrees), and two different sizes: 2mm and 2.5.

Not sure which one to buy? You can check out a list of popular games HERE or read below: 

2mm straight clips - These are what most gamers will need for most of their games!  If you're going to buy one clip type, this should be it.  These will hold together most any games with multiple boards, such as War of the Ring, Formula D, Star Wars Imperial Assault, Cyclades, GMT Games, and most others!  Will fit boards from 1.6mm - 2.25mm

2.5mm straight clips - These clips were made primarily for Zombicide and other CMON games as they seem to be a little thicker and 2mm don't always work well.  Plenty of other games will also use 2.5mm better than 2.0mm, you can find a full game compatibility list in the google doc listed above.  Will fit boards from 1.9mm - 2.7mm

 90° 2mm clips - This is great for any 2mm boards that don't line up with each other or games that use square tiles.  Many expansions have side boards that could benefit from this such as Game of Thrones 2e will utilize the 2mm 90° clips great!  Will fit boards from 1.7mm - 2.3mm

90° 2.5mm clips - Some scenarios in Zombicide and other games will benefit from being able to clip boards together that don't line up edge to edge.  Will fit boards from 2.4mm - 2.8mm

120° 2mm clips - These will work great for Gaia Project, Mage Knight, Clans of Caledonia, Twilight Imperium, older versions of Catan that don't have the border tiles.  Will work with any game that uses hex tiles of 1.75 - 2.3mm

120° 2.5mm clips - Printables by Caren just calls these the Rallyman GT clips! Will work with any game that uses hex tiles of 2.35mm - 2.8mm